IMS IndustrieMontageService GmbH Logo
Best Practices

Cable Assembly and Wiring: Customized Solutions for Your Application

Thomas Müller
18 min read

From simple cable sets to complex wire harnesses – professional cable assembly with quality assurance. Materials, processes and quality standards in detail.

Cable Assembly and Wiring: Customized Solutions for Your Application

Cables and wiring are the nervous system of modern devices and machines. Professional cable assembly is crucial for operational reliability, longevity, and EMC compliance. At IMS, we have been manufacturing cable assemblies from simple connection cables to complex wire harnesses for over 30 years.

What is Cable Assembly?

Definition: Cable assembly refers to the processing of cables and wires through:

  • Stripping and preparation of wire ends
  • Assembly of connectors, contacts, ferrules
  • Integration of additional components (ferrites, shields, strain reliefs)
  • Testing of electrical properties
  • Labeling and packaging

Distinction:

  • Simple cable assemblies: Individual wires with connectors
  • Cable sets: Multiple wires as a set for one device
  • Wire harnesses: Complex bundled and routed wires for machines/vehicles

IMS Competencies in Cable Assembly

1. Wire Types We Process

Signal Wires:

  • Thinnest sensor cables (0.14 mm²) to multicore cables
  • Shielded and unshielded versions
  • Various insulation materials (PVC, PUR, silicone, PTFE, PE)
  • CAT5/CAT6/CAT7 network cables
  • Coaxial cables (50 ohm, 75 ohm)

Power-Carrying Wires:

  • Cross-sections 0.25 mm² to 16 mm²
  • Low voltage (12-48V) and high voltage (up to 400V)
  • Flexible or rigid versions
  • Temperature resistant up to 200°C (silicone wire)

Special Wires:

  • Bus cables (CAN, Profibus, Ethernet)
  • Highly flexible drag chain cables
  • Ribbon cables (IDC assembly)
  • Medical technology wires (biocompatible, sterilizable)

2. Connectors and Contacts

Our Portfolio Includes Over 50 Connector Systems:

Industry Standards:

  • M8, M12, M23 (sensor-actuator technology)
  • D-Sub (9-, 15-, 25-, 37-pin)
  • Harting Han series
  • Wieland GST18
  • Phoenix Contact

Power Electronics:

  • Anderson PowerPole
  • XT60/XT90 (hobby/drones)
  • High-current connectors up to 150A

Automotive:

  • AMP/TE Automotive series
  • Deutsch connectors (DT, DTM)
  • Kostal connectors

Special Applications:

  • Medical technology (LEMO, ODU)
  • Aerospace (MIL-Spec)
  • Waterproof connectors (IP67, IP68, IP69K)

Crimp Contacts:

  • Open crimp contacts for custom housings
  • Precision crimp for AWG24-AWG10
  • Insulated and non-insulated versions

3. Processing Techniques

Wire Stripping:

  • Manual (precision tools) for prototypes
  • Semi-automatic (stripping machines) for series
  • Various insulation materials without conductor damage

Crimping:

  • Hand crimp tools (controlled force) for prototypes
  • Pneumatic crimp presses for series
  • 100% pull force test of critical connections
  • Microscopic quality control

Soldering:

  • Classic hand soldering for special applications
  • SMD soldering for cables to PCBs
  • Ultrasonic soldering for difficult-to-solder materials
  • Lead-free and leaded solders (depending on application)

Overmolding:

  • For partners: Potting of connector connections
  • Strain relief through plastic coating
  • IP protection increase through potting

4. Testing and Quality Assurance

Electrical Tests (100% with us):

  • Continuity test of all wires
  • Insulation test (test voltage up to 2,500V DC)
  • Resistance measurement (important for power cables)
  • Shield test for shielded cables
  • Functional test with customer equipment (on request)

Mechanical Tests (sampling or 100%):

  • Pull force test on crimp connections
  • Bending strength for highly flexible cables
  • Mating cycles test for connectors
  • Abrasion resistance for drag chain applications

Visual Inspection (100%):

  • Microscopic inspection of crimp connections
  • Check for damage to insulation
  • Control of polarity and pin assignment
  • Check of markings

Practical Application Examples

Example 1: Medical Technology – Patient Monitoring

Requirement: Manufacturer of patient monitors needs 800 sensor cables per year for ECG derivation.

Specification:

  • 12-wire cable, shielded
  • Miniature connector at device (LEMO)
  • 12 individual contacts at patient (snap button)
  • Length: 2.5 meters
  • Silicone insulation (skin compatibility, disinfectability)
  • Color coding of leads according to DIN

IMS Solution:

  • Cable: Silicone multicore with shielding
  • Crimping of all 12 contacts with microscopic control
  • 100% electrical continuity and insulation test
  • Colored ferrules for clear assignment
  • Individual packaging in ESD bags with sterilization indicator
  • Documentation batch traceability (FDA-compliant)

Result:

  • Failure rate < 0.1%
  • Delivery time for call-offs: 5 days
  • Customer achieved CE certification without rework

Example 2: Mechanical Engineering – Sensor Wiring

Requirement: Special machine builder needs cable sets for 50 machines with 30 sensors each.

Specification:

  • M12 connectors (4-pin and 5-pin)
  • Various lengths (1m to 15m)
  • Drag chain suitability
  • Clear identification
  • Just-in-time delivery (machine by machine)

IMS Solution:

  • Standardization to 2 cable types (4- and 5-wire)
  • Pre-assembled M12 connectors (component stock)
  • Cable lengths individually per order
  • Laser marking with machine ID + sensor ID
  • Delivery in sorted wire harness per machine
  • Documentation for installer

Result:

  • Customer saves 4 hours assembly time per machine
  • No more mix-ups (previously frequent error source)
  • Reduction of warehousing by 60% (JIT delivery)

Example 3: Automotive – Wire Harness for E-Mobility

Requirement: Development and production of wire harness for battery management system of electric vehicle.

Specification:

  • High-voltage cables (400V)
  • Temperature resistant up to 150°C
  • Vibration resistant (automotive grade)
  • Flame retardant according to FMVSS 302
  • CAN bus integration
  • 500 pieces/year (small series vehicle)

IMS Solution:

  • Development support: Layout of wire harness in 3D data
  • Prototype construction: 5 wire harnesses within 2 weeks
  • Testing: Vibration, temperature, breakdown
  • Series: Production on assembly board (exact positioning)
  • Testing: 100% high voltage test (2,000V DC)
  • Documentation: PPAP Level 3 for automotive customer

Result:

  • Successful type approval on first attempt
  • Series running for 2 years without complaint
  • Customer commissioned us for 2 more vehicle projects

Material Selection: Which Cable for Which Application?

Insulation Material Overview

| Material | Temperature | Flexibility | Chemicals | Application | |----------|-------------|-------------|-----------|-------------| | PVC | -20 to +80°C | Medium | Limited | Standard, cost-effective | | PUR | -40 to +90°C | Very good | Good | Industry, drag chains | | Silicone | -60 to +180°C | Very good | Medium | Medical, food | | PTFE | -200 to +260°C | Low | Excellent | High temperature, chemistry | | PE | -50 to +80°C | Medium | Good | RF technology, coax |

IMS Recommendation:

  • Standard application: PVC (cheap, sufficient)
  • Industrial environment: PUR (robust, flexible, oil-resistant)
  • Medical technology: Silicone (biocompatible, sterilizable)
  • High temperature: PTFE (up to 260°C)
  • High frequency: PE (low attenuation)

Shielding: When Necessary?

Unshielded Cable:

  • For pure power supply
  • In EMC-uncritical environments
  • Cost-optimized

Shielded Cable:

  • Braided shield (copper): 80-95% shielding effectiveness, flexible
  • Foil shield (aluminum): 100% shielding effectiveness, less flexible
  • Combination shield (foil + braid): Best shielding effectiveness

When to shield?

  • Sensor signals (analog/digital) in noisy environment
  • Proximity to power electronics
  • EMC regulations (e.g., CE conformity)
  • Precision measurement technology

IMS Tip: Shield termination on one side only (usually device side) to avoid ground loops!

Wire Count and Cross-Section

Signal Cables:

  • Cross-section typically 0.14 - 0.5 mm²
  • Wire count: 2 to 50 (multicore)

Power Cables:

  • Cross-section according to current carrying capacity:
    • 0.25 mm² → 3A
    • 0.5 mm² → 7A
    • 1.0 mm² → 12A
    • 1.5 mm² → 16A
    • 2.5 mm² → 20A
    • 4.0 mm² → 30A
    • 10 mm² → 70A

IMS Service: We calculate the necessary cross-section for you considering cable length, current, and permissible voltage drop.

Standards and Norms in Cable Assembly

Industry Standards:

  • DIN VDE 0298-4: Current carrying capacity of cables
  • DIN EN 60352: Crimp connections
  • IPC-A-620: Cable assemblies for electronics
  • IEC 60227 / 60245: PVC-insulated cables

Industry-Specific:

  • ISO 13485: Medical technology
  • IATF 16949: Automotive
  • EN 45545: Railway technology (fire protection)
  • MIL-STD-1553: Military/aerospace

Test Standards:

  • DIN EN 60068: Environmental tests (temperature, vibration, humidity)
  • IEC 61000-4-x: EMC tests

IMS Certifications:

  • ISO 9001:2015 (Quality management)
  • Personnel trained according to IPC-A-620
  • Calibrated test equipment (DAkkS traceable)

Design for Manufacturing (DFM) for Cables

Common Design Errors and How We Help:

Error 1: Wrong Connector Chosen

Problem: Customer chooses miniature connector, but cable is too thick. IMS Solution: Advice on suitable connector or cable type already in development phase.

Error 2: Too Many Different Lengths

Problem: Customer orders 20 different lengths (1.00m / 1.05m / 1.12m / ...). IMS Solution: Standardization to e.g. 1.0m / 1.5m / 2.0m → fewer errors, faster, cheaper.

Error 3: No Strain Relief Provided

Problem: Cable breaks after short time at connector. IMS Solution: Integration of kink protection, strain relief sleeve, or excess length with coiling.

Error 4: Shield Terminated Incorrectly

Problem: Shield terminated on both sides → ground loops, EMC problem. IMS Solution: Single-sided shield termination with drain wire.

Prototype to Series: The IMS Process

Phase 1: Inquiry and Consultation

You provide:

  • Technical description or drawing
  • Quantity and delivery date
  • Special requirements (standards, environment)

We provide:

  • Feasibility analysis
  • DFM suggestions for optimization
  • Material recommendations
  • Quote with unit prices (tiered) and prototype costs

Phase 2: Prototype Construction (3-5 days)

Process:

  • Order material (1-2 days)
  • Manufacture first sample (1 day)
  • Test and document (1 day)
  • Ship to you

You test:

  • Mechanical fit
  • Electrical function
  • Appearance and quality

Iteration: If changes needed, second iteration within 2 days.

Phase 3: Series Start-up (after approval)

Preparations:

  • Order material (3-4 weeks for exotic connectors)
  • Build test fixture (if necessary)
  • Create work instructions
  • Train team

Series Start:

  • First batch with increased control
  • Document lessons learned
  • Optimize process times

Phase 4: Series (ongoing)

Flexible Call-offs:

  • Framework contract with annual demand
  • Individual call-offs as needed
  • Delivery time standard cables: 5-7 days
  • Express possible (surcharge)

Quality Assurance:

  • Sampling according to AQL 1.5
  • 100% electrical testing
  • Documentation by batch

Cost Optimization for Cable Assemblies

Price Influencing Factors:

  1. Quantity (biggest leverage!)

    • 10 pieces: e.g. €25 / piece
    • 100 pieces: e.g. €12 / piece
    • 1,000 pieces: e.g. €6 / piece
  2. Complexity

    • Simple 2-wire cable with standard connectors: cheap
    • 20-wire cable with special connectors and shielding: expensive
  3. Material Costs

    • Standard connectors: €0.50 - 5
    • Special connectors: €10 - 50 (!)
  4. Testing Effort

    • Visual inspection: low
    • 100% electrical testing: medium
    • Functional test with device: high

Optimization Tips:

✓ Standardize: Fewer different cable types = cheaper ✓ Use standard connectors: Better availability, lower price ✓ Reasonable lot sizes: Don't order 10 pieces, but 50 (price/piece drops significantly) ✓ Annual contract: Security for us = better price for you ✓ Coordinate tests: Don't test each cable individually with device (time!)

Quality Assurance: What We Do Differently

Standard with Us (not taken for granted!):

  1. 100% Electrical Testing

    • Many manufacturers test only by sampling
    • We: Every cable for continuity, insulation, shielding
  2. Calibrated Test Equipment

    • All test equipment calibrated annually (DAkkS)
    • Documentation for audit
  3. Microscopic Crimp Inspection

    • Samples of each series under microscope
    • Documentation with photos
  4. Four-Eyes Principle

    • Manufacturer does visual inspection
    • Second person does final inspection
    • Error rate drops by 90%
  5. Traceability

    • Batch number on each cable
    • Assignment to material batches
    • Important for medical technology, automotive

Special Topics

ESD Protection in Cable Assembly

Critical for:

  • Sensitive electronic assemblies
  • Connectors with gold-plated contacts

IMS Measures:

  • ESD protection zone in cable assembly
  • Grounded workstations
  • ESD wrist straps for employees
  • Packaging in ESD bags

Offshore Wind and Harshness

Requirements:

  • Salt water resistant materials (special insulation)
  • UV resistant
  • Temperature cycles -40°C to +80°C
  • Waterproof (IP68 or higher)

IMS Solution:

  • Selection of suitable materials (e.g., PUR with UV protection)
  • Waterproof connectors (e.g., Fischer, ODU)
  • Crimp connections additionally sealed
  • Extensive climate tests

High-Frequency Cables (HF/RF)

Peculiarities:

  • Impedance critical (50 ohm / 75 ohm)
  • Shielding must be perfect
  • Connector assembly requires special tools

IMS Competencies:

  • SMA, N-Type, BNC connectors
  • TDR testing (Time Domain Reflectometry) for impedance control
  • Return loss measurement
  • Application up to 6 GHz

Frequently Asked Questions (FAQ)

Q: From what quantity is cable assembly worthwhile? A: With us from 1 piece! We are happy to manufacture prototypes. More economical from about 20-50 pieces.

Q: Can you also manufacture with our own materials? A: Yes, "contract assembly" possible. You supply cable + connector, we assemble.

Q: How long does sampling take? A: Standard components: 3-5 days. For exotic connectors possibly longer (material procurement).

Q: Can you also manufacture without drawing? A: Yes, if you send us a sample. We create drawing and manufacture accordingly.

Q: Do you offer express manufacturing? A: Yes, for urgent projects within 24-48 hours (depending on material availability).

Q: Do you really test every cable electrically? A: Yes, 100% continuity and insulation testing is standard with us.

Conclusion: Professional Cable Assembly as a Success Factor

Cables are more than "a few wires with connectors". Professional cable assembly:

  • Saves time in your production
  • Reduces errors and complaints
  • Increases lifespan of your devices
  • Meets regulatory requirements (CE, UL, FDA)

What Distinguishes IMS:

  • ✓ Over 30 years of experience in cable assembly
  • ✓ Wide portfolio of connectors (50+ systems)
  • ✓ Prototypes in 3-5 days
  • ✓ No minimum quantities
  • ✓ 100% electrical testing
  • ✓ Working in accordance with ISO 9001
  • ✓ Personal contact person

Your Project: Do you have a cable project? Contact us:

  • Phone: +49 6129 50 29 39 0
  • Email: office@ims-lohnfertigung.de
  • Or send us your drawings/samples

We advise you free of charge on:

  • Material selection
  • Connector choice
  • Cost optimization
  • Standards and certifications

IMS IndustrieMontageService – Your Cables in Good Hands.

About the Author

Thomas Müller

Technischer Leiter / Technical Director

Mit über 20 Jahren Erfahrung in der Präzisionsmontage leitet Thomas unser Produktionsteam und entwickelt innovative Montagelösungen.

Topics

Cable Assembly
Wiring
Connectors
Wire Harness
Electronics

Do you have questions about this topic?

Contact us for a non-binding consultation.