IMS IndustrieMontageService GmbH Logo
Small Series

Economical Small Series Production: 7 Tips for Cost Optimization

Markus Weber
9 min read

Small series production doesn't have to be expensive. With the right strategies, even small quantities can be manufactured economically.

Economical Small Series Production: 7 Tips for Cost Optimization

Small series are often considered uneconomical. Unjustly! With the right strategies, even quantities from 10 to 1,000 units can be produced cost-efficiently. At IMS, we have specialized in exactly this sweet spot.

Tip 1: Focus on Manual Assembly

The biggest cost factor in automated small series production is setup costs. A CNC machine or assembly line requires:

  • Programming (€500-5,000)
  • Tools and fixtures (€2,000-50,000)
  • Test runs and optimization (1-3 days)

With manual assembly, these costs are completely eliminated. Our specialists start production immediately.

Example calculation:

  • 50 pieces assembly
  • Automated: €10,000 setup costs + 50 × €30 = €11,500 (€230/piece)
  • Manual: 50 × €85 = €4,250 (€85/piece)

Tip 2: Design for Manufacturing (DFM)

The assembly-friendliness of the design has enormous influence on costs:

Poor design:

  • 15 different screw sizes
  • Hard-to-reach assembly points
  • Tight tolerances without functional reason
  • Missing assembly aids

Optimized design:

  • Standardized screws (max. 3 sizes)
  • Assembly-friendly geometries
  • Functional tolerances
  • Built-in centering aids

Our service: We analyze your design free of charge and suggest optimizations that can save up to 40% assembly time.

Tip 3: Choose Materials Intelligently

Material selection has direct impact on assembly costs:

Expensive material options:

  • Exotic alloys
  • Unnecessarily high purity grades
  • Difficult-to-process materials

Cost-optimized alternatives:

  • Standard materials with same functional properties
  • Materials with better availability
  • Assembly-friendly materials

Tip 4: Plan Batch Sizes Intelligently

The right batch size is crucial:

Too small batches (e.g., 10 pieces):

  • High startup costs per piece
  • Frequent changeovers
  • Higher administrative effort

Too large batches (e.g., 5,000 pieces):

  • Capital tied up
  • Storage costs
  • Obsolescence risk with design changes

Optimal strategy:

  • Initial order: 50-100 pieces
  • Framework agreement for reorders
  • Just-in-time production as needed

Tip 5: Properly Assess Quality Costs

Quality doesn't have to be expensive if it's considered from the beginning:

Expensive rework:

  • 100% final inspection with external measuring devices
  • Rework of defective parts
  • Complaint costs

Intelligent prevention:

  • Process-accompanying quality control
  • First-Article Inspection (FAI)
  • Trained assemblers with quality awareness

At IMS, our assemblers have an average of 10+ years of experience. They recognize quality problems before they occur.

Tip 6: Standardize Documentation

Excessive documentation causes unnecessary costs:

Standard documentation (sufficient):

  • Assembly instructions
  • Inspection plan
  • Delivery note with batch traceability

Extended documentation (only when needed):

  • Photo documentation of each part
  • Individual test protocols
  • Detailed process documentation

Clarify already in the quotation phase which documentation is really needed.

Tip 7: Choose the Right Partner

Not every contract manufacturer is suitable for small series:

Warning signs:

  • High minimum order quantities
  • Long lead times
  • Inflexible processes
  • Focus on large series

Ideal small series partner:

  • Specialization in flexible manufacturing
  • Fast response times
  • Fair prices without minimum setup costs
  • Consulting competence

At IMS, small series are not a burden, but our core business. We have consistently optimized our processes for flexibility and economy.

Case Study: Cost Reduction of 60%

A customer produced electronic control units:

  • Before: Automated manufacturing, 200 pieces/year, €450/piece
  • Problem: High setup costs, inflexible with changes
  • Solution: Switch to manual assembly at IMS
  • After: €180/piece, DFM optimization included
  • Savings: €54,000 annually

Conclusion: Small Series Can Be Economical

With the right strategies and the right partner, small series are by no means uneconomical. The key lies in:

  1. Flexible production methods (manual assembly)
  2. Assembly-friendly design
  3. Intelligent planning
  4. The right partner

Free consultation: Send us your drawings, we analyze optimization potential and create an individual offer.

About the Author

Markus Weber

Produktionsleiter / Production Manager

Markus optimiert unsere Produktionsprozesse und koordiniert komplexe Montageprojekte mit höchster Effizienz.

Topics

Small Series
Cost Optimization
Economics
DFM

Do you have questions about this topic?

Contact us for a non-binding consultation.