Prototype Manufacturing: How Development-Accompanying Production Accelerates Product Development
Prototypes are more than first samples. Learn how iterative development with the right partner saves time and costs.
Prototype Manufacturing: How Development-Accompanying Production Accelerates Product Development
In product development, time is money. Companies that bring their products to market faster have decisive competitive advantages. Development-accompanying manufacturing at IMS significantly accelerates this process.
The Traditional Development Process: Slow and Expensive
Classic product development follows a sequential model:
- Design/CAD
- Order prototype (delivery time: 4-8 weeks)
- Test
- Redesign
- New prototype (again 4-8 weeks)
- ...
Problem: Each iteration costs 4-8 weeks and €5,000-20,000. With 3-5 iterations, 6+ months pass.
Development-Accompanying Manufacturing: Fast and Iterative
At IMS, it works differently:
- Design/CAD
- Prototype at IMS (delivery time: 3-5 days)
- Test
- Redesign with our improvement suggestions
- Optimized prototype (again 3-5 days)
- ...
Advantage: Iteration in 1 week instead of 6-8 weeks. Time-to-market shortened by months.
Why Are We So Fast?
1. No Setup Costs
Automated manufacturing requires:
- CAM programming
- Tool setup
- Test runs
- Optimization
That takes 1-2 weeks. With manual assembly, we start immediately.
2. Parallel Processes
While you test, we already analyze:
- Assembly experiences
- Optimization potential
- Cost reduction opportunities
Our feedback flows into your redesign.
3. Flexible Capacities
We don't block machines with long setup times. Your project starts immediately when material is available.
Design for Manufacturing (DFM) from the Start
A huge advantage of development-accompanying manufacturing: You receive DFM feedback already in the development phase.
Typical DFM Optimizations:
Example 1: Screw Connections
- Originally: 8 different screw types
- Optimized: 2 standard types
- Savings: 30% assembly time, 15% material costs
Example 2: Accessibility
- Originally: Screw only accessible with special tool
- Optimized: Geometry adapted for standard tool
- Savings: 50% assembly time for this step
Example 3: Tolerances
- Originally: ±0.05mm without functional reason
- Optimized: ±0.2mm functionally sufficient
- Savings: 40% part manufacturing costs
The IMS Prototype Process in Detail
Phase 1: Analysis (Day 1)
- Review of drawings
- Identification of critical assembly steps
- Preliminary DFM feedback
- Initiate material procurement
Phase 2: First Sample (Day 2-3)
- Assembly of first prototype
- Photo documentation of all steps
- Identification of assembly problems
- Functional test (if desired)
Phase 3: Feedback (Day 3-4)
- Detailed assembly report
- DFM optimization suggestions
- Cost analysis for series production
- Discussion with your development team
Phase 4: Iteration (from Day 5)
- Quick implementation of changes
- Comparison with previous version
- Document optimization progress
Case Study: Medical Diagnostic Device
A startup developed a portable diagnostic device.
Initial Situation:
- Complex design with 65 individual parts
- Extremely tight deadlines (trade fair in 4 months)
- Budget: €30,000 for prototype phase
Our Approach:
- Week 1: Prototype V1 + comprehensive DFM feedback
- Week 2: Redesign by customer
- Week 3: Prototype V2 with 12 optimizations
- Week 4: Fine-tuning
- Week 5: Prototype V3 (final)
- Weeks 6-8: Small series of 50 pieces for trade fair
Result:
- Product ready on time for trade fair
- Budget maintained (€27,500)
- Production costs for series 35% lower through DFM optimization
- Customer received large order at trade fair
Using Rapid Prototyping Technologies Sensibly
3D printing and CNC are not always the best solution:
When 3D Printing Makes Sense:
- Complex geometries
- Individual parts as placeholders
- Functional prototypes without load requirements
When Traditional Manufacturing is Better:
- Original materials desired
- Mechanical stress
- Surface quality important
- Series-similar prototype
At IMS we combine:
- 3D-printed placeholders for expensive parts
- Original components where functionally necessary
- Manual assembly as in series
Documentation for Series Production
Each prototype is a learning phase for series production:
We document:
- Critical assembly steps
- Required tools and fixtures
- Time required per step
- Quality inspection points
- Potential sources of error
Your advantage: At series start, we already have:
- Optimized work instructions
- Trained personnel
- Proven processes
- Calculated production times
Costs: Prototypes vs. Series
Many companies are surprised how affordable prototypes are at IMS:
Prototype 1:
- One-time: €2,000 setup (analysis, tools)
- Unit costs: €450
- Total: €2,450
Prototype 2-5:
- No setup (process known)
- Unit costs: €380 (learning curve)
- Total per piece: €380
Series (100 pieces):
- Setup: €1,500 (optimized fixtures)
- Unit costs: €180 (routine, scale effects)
- Total: €19,500 (€195/piece)
Conclusion: Partner Not Supplier
Development-accompanying manufacturing is more than producing prototypes. It's a partnership that:
- Accelerates development
- Reduces costs
- Increases product quality
- Prepares series production
At IMS, we see ourselves as part of your development team. Our goal: To bring your product to market successfully as quickly as possible.
Start your project: Send us your CAD data, we'll create a quote with initial DFM assessment within 24 hours.
About the Author
Thomas Müller
Technischer Leiter / Technical Director
Mit über 20 Jahren Erfahrung in der Präzisionsmontage leitet Thomas unser Produktionsteam und entwickelt innovative Montagelösungen.
